AWS A5.4: E310-16

AWS A5.4: E310-16

Used to join 310 stainless as well as for the welding of steels with 20%-27% Chromium and 18%-22% Nickel. Used as a transition layer for high restrained joints of high carbon steels.

Welding Wire  AWS A5.4: E310-16

APPLICATIONS

Single and multiple pass, DCEP, AC, All Position

INDUSTRIES

TYPICAL WELD METAL CHEMISTRY* (Chem Pad)

Welding Positions:

CONFORMANCES AND APPROVALS:

• AWS A5.4, Class E310-16
• ASME SFA 5.4

Excellent for welding and building up parts for heat treatment and case hardening furnaces, cement kilns, and other burners subject to high temperature oxidation in a non-sulphurous atmosphere.

STORAGE

VERTICAL-UP

FLAT & HORIZONTAL

OVERHEAD

VERTICAL-DOWN

Use slight weaving motion within the puddle

Angle electrode 10-15° from 90°

AC-DC electrodes have a high degree of moisture resistance; however, for critical applications, the electrodes
should be held at 215°F - 300°F after opening.

Not recommended

Use weaving techniques. Reduced amperage compared to flat position setting

TYPICAL MECHANICAL PROPERTIES* (As Welded)

• Maintaining a proper welding procedure - including pre-heat and interpass temperatures - may be critical
depending on the type and thickness of steel being welded.

AVAILABLE DIAMETERS AND PACKAGES:

FEATURES AND BENEFITS

• Easy strike and re-strike 
• Electrode doesn’t overheat 
• Spray-like arc transfer 
• Easy slag release 
• Directional arc 
• All-position • Easy to use, less chance of starting defects

• Less stub loss, cost-effective

• Low spatter and less clean-up

• Less chance of slag inclusions

• Metal goes where directed

• Welds extremely well in flat, horizontal, vertical (up) and overhead positions

Category

AWS A5.4: E310-16, Stainless Welding Wire,tianjin, China

ARC LENGTH

Short (less than 1/2 the diameter of the electrode)

RECOMMENDED WELDING PROCEDURES

RECONDITIONING

If exposed to atmosphere for extended periods, recondition at 660°F for 2 hours