We are aluminium alloy welding wire manufacturer in tianjin China We specialize in producing TIG and MIG and rods aluminium alloy welding wire. Our supply chain reaches into the American, European and Asian markets, our products are used in motor vehicle production, shipbuilding, locomotive,and many other industries.
The standards are AlMn Welding Wire ER3103, Aluminium Welding Wire ER1100, Aluminium Welding Wire ER1070, AlCu Welding Wire ER2319, AlSi Welding Wire ER4043, AlSi Welding Wire ER4047, AlMg Welding Wire ER5356, AlMg Welding Wire ER5183, AlMg Welding Wire ER5556, AlMg Welding Wire ER5754, AlMg Welding Wire ER5087.
Standard
aluminium alloy welding wire Application
1100 aluminum filler metal is designed for applications with electrical conductivity requirements & chemical storage facilities.
4043 filler metal is a popular aluminum/silicon filler alloy for general purpose welding applications.
4043 filler metal is a popular aluminum/silicon filler alloy for general purpose welding applications.
Common applications for 4047 are for thin sections where the higher fluidity and lower shrinkage rate are important for distortion control. 4047 is also used in applications where excellent wetting action for joint sealing of pressurized fluids and gases is required.
Alloy 4943 filler metal was formulated to be welded with the same weld procedure specifications as 4043 and 4643, and does not depend upon dilution from the base metal during welding to increase the strength of the weld deposit, while maintaining the same weld characteristics and benefits of 4043 and 4643.
5183 filler metal is the most common aluminum/magnesium alloy for welding 5083 base metal in ship building applications. 5183 has higher strength values than 5356 with excellent salt water corrosion resistance when welded to 5083.
5356 filler metal is the most common aluminum/magnesium alloy for general purpose welding and is typically used in the construction industry in fabricating truck trailers, small fishing boats, and in cryogenic applications.
5554 filler metal is the most common aluminum/magnesium alloy for welding 5454 base metal where sustained elevated temperatures above 150 degrees F are experienced.
Higher strength filler metal than 5183 and is designed for welding structures where maximum as welded transverse ultimate tensile strength (UTS) and shear strength values are required.
Common applications for 4047 are for thin sections where the higher fluidity and lower shrinkage rate are important for distortion control. 4047 is also used in applications where excellent wetting action for joint sealing of pressurized fluids and gases is required.
Search Products
1
