AWS A5.1 E6010

EN ISO 2560-B-E4310A

JIS Z 3211 E4310

Characteristics and Application

AWS A5.1 E6010 Welding rods, welding electrode is designed for DC(+) welding. The welding in all position can produces stable arc, good slag release, and deep penetration. It is suitable for the welding of pressure pipes, oil tanks, and boilers.

Typical chemical Composition of Weld Metal (%)

Typical Mechanical Properties of Weld Metal

Welding Positions:

Notes on usage:

1. Be sure to clean up the contamination on the base metal to reduce the cause of welding defect.
2. It is highly recommended to dry the electrodes at 80-100℃ for 30-60 minutes before using.
3. Apply proper currents to prevent X-Ray and mechanical properties from being worse.
4. Use proper low currents as recommended.

5. Keep the product dry, while it is stored or delivered.

C 0.13   Mn 0.45  Si 0.35  P 0.02  S 0.015

Yield strength 470Mpa  Tensile Strenght 530MPa  Elongation 25%  Charpy V-Notch -30 ℃  42J

Welding rods, welding electrode