AWS A5.1 E6019

EN ISO 2560-B-E4319A

JIS Z 3211 E4319

Characteristics and Application

AWS A5.1 E6019 Welding rods, welding electrode is an ilmenite type electrode and can be used in all-position welding. It has excellent mechanical properties and X-Ray performance, stable arc, and good weldability. The weld bead is good with deep penetration and hardly causes slag inclusion. The weld metal can meet the elongation request of 22% min. Its features allows the product to be applied to important structural objects such as ship body, boiler, vehicle frame, oil tank, steel frame and suitable for structural steels, steel strip, thin steel plate, fabrication steels which thickness is on or below 25 mm.

Typical chemical Composition of Weld Metal (%)

Typical Mechanical Properties of Weld Metal

Welding Positions:

Notes on usage:

1. Be sure to clean up the contamination on the base metal to reduce the cause of welding defect.
2. It is highly recommended to dry the electrodes at 80-100℃ for 30-60 minutes before using.
3. Apply proper currents to prevent X-Ray and mechanical properties from being worse.
4. When you weld with weave method, the moving range should not exceed 3 times the wire dia.

5. Keep the product dry, while it is stored or delivered.

C 0.095   Mn 0.45  Si 0.08  P 0.02  S 0.015

Yield strength 430Mpa  Tensile Strenght 490MPa  Elongation 27%  Charpy V-Notch -20 ℃  50J

Welding rods, welding electrode