Formulated to allow excellent impact values at lower temperatures. All position wire with low hydrogen levels.

Description

Welding Positions

Flux Cored Welding Wire

Classification:

AWS A5.20: E71T-1 CJ H4, E71T-9CJ H4, E71T-12CJ H4

EN ISO 17632-A T424 P C1 2 H5

EN ISO 17632-B T494 T1-1 C1 AP H5

TYPICAL DIFFUSIBLE HYDROGEN*

Fast-freezing, rutile type, flux-cored wire

100% Carbon Dioxide (CO2), 35- 50 cfh (17-24 I/min)

Direct Current Electrode Positive (DCEP)

0.045" (1.2 mm), 0.052" (1.4 mm), 1/16" (1.6 mm)

Not recommended

Product should be stored in a dry, enclosed environment, and in its original intact packaging

Non-alloyed and fine grain steels

Single or multi-pass welding

Structural applications

Earthmoving equipment

Storage vessels

Shipbuilding

Offshore

Thick section weldments

APPLICATIONS

SLAG SYSTEM OR WIRE TYPE

SHIELDING GAS

TYPE OF CURRENT

STANDARD DIAMETERS

RE-DRYING

TYPICAL WELD METAL CHEMISTRY* (Chem Pad)

TYPICAL MECHANICAL PROPERTIES*

CONFORMANCES AND APPROVALS

· AWS A5.20, E71T-1CJ H4, E71T-9CJ H4, E71T-12CJ H4

· AWS A5.20M, E491T-1CJ H4, E491T-9CJ H4, E491T-12CJ H4

· ASME SFA 5.20, E71T-1CJ H4, E71T-9CJ H4, E71T-12CJ H4

· ASME SFA 5.20M, E491T-1CJ H4, E491T-9CJ H4, E491T-12CJ H4

· ABS, 100% CO,, 4YSA H5

· CWB, 100% CO2, E491T1-C1A4-(CS1, CS2)-H4 (E491T-9J-H4) (E491T-12J-H4) [1.2 mm- 1.6 mm diameter electrodes]

· DNV-GL, 100% CO2, IV Y40MS (H5)

· Lloyd's Register, 100% CO2, 4Y40S H5

· CE Marked per CPR 305/2011

· EN ISO 17632-A: T424 P C1 2 H5 [1.2 mm diameter electrodes]

· EN ISO 17632-B: T494 T1-1 C1 AP H5 [1.2 mm diameter electrodes]

STANDARD DIAMETERS AND PACKAGES: 

For a complete list of diameters and packaging, please contact

• Maintaining a proper welding procedure including preheat and temperatures -may critica interpass depending on the type and thickness of steel being welded.
• See Above: This information was determined by welding with 100% Carbon Dioxide (CO2) shielding gas with a flow rate between 35-50 cfh(17-24 1/min).
• All positionsinclude:Flat.Horizontal Vertical Up.and Overhead

STORAGE

FEATURES AND BENEFITS

High impact toughness at low temperatures

Low difusble hydrogen weld deposit

High average CTOD value

High-deoxidizer formulation

Easy slag removal

Resists cracking in severe applications

Minimizes risk of underbead cracking

Resist crack formation and propagation

Reduces surface preparation requirements, increases productivity

Reduces clean-up time, minimizes risk of inclusion

TYPICAL CHARPY V-NOTCH IMPACT VALUES*