AWS A5.22 E316LT0-1

EN ISO 17633-A-T 19 12 3 L R C 1 3

JIS Z 3323 TS 316L-F C 1 0  

Characteristics and Application

AWS A5.22 E316LT0-1 Flux Cored Arc Welding Wire is designed for flat position welding by gas shield of CO2 gas. An austenitic stainless steel deposited that can be used for joining Types 316,316L stainless steels. It provides high resistance to intergranular corrosion with low carbon weld deposit.

Typical chemical Composition of Weld Metal (%)

Typical Mechanical Properties of Weld Metal

Welding Positions:

Notes on usage:

1. Before welding, oil, rusty, and moisture should be cleaned off the base material that should have the proper protection from the wind in welding site.
2. Use 99.8% purity or higher Co2 shielding gas. Maintain the flow rate not less than 20L/min when wire diameter is 1.2 mm.

3. Keep the product dry, while it is stored or delivered.

C 0.027  Mn 1.25  Si 0.68  P 0.025  S 0.006 Cr 18.60 Ni 11.40 Mo 2.27

Tensile Strenght 558MPa  Elongation 38%    

Flux Cored Arc Welding Wire