AWS A5.23 F8P2-EB2-B2 welding fulx xiang welding is a high—basic agglomerated submerged arc flux. It is suitable for using DC+ single, AC single, DC+/AC and AC/AC. It provides excellent weld ability even in narrow groove. Due to its neutral behavior, good mechanical properties of weld metal can be controlled by using the appropriate wire grade.
With combination of low phosphorus wires (TSW-E22R or TSW-E23R), the X and J factors can be controlled to satisfy the step cooling requirement.
Heat treatable and heat resistant low-alloy CrMo steel Pressure vessel Fine grain structural steels for low temperature requirements High tensile fine grain steels  

AWS A5.23 F8P2-EB2-B2

EN ISO 24598-A S 55 3 FB CrMo1

Characteristics and Application

Typical chemical Composition of Weld Metal (%)

Welding Positions:

Notes on usage:

1. Dry the flux at 300—350℃ for 2—4hr holding time.
2. Adding proper quantity of new flux with the used one to maintain good quality of weld metal.

Mechanical Properties 

Welding Flux

Yield strength 518Mpa Tensile Strenght 605MPa Elongation 28% Charpy V-Notch -30℃ 183J

C 0.09 Mn 0.80 Si 0.25 P 0.013 S 0.008  Cr 1.10 Mo 0.45 Cu 0.03