AWS A5.22: E410NiMoT1-4/-1

AWS A5.22: E410NiMoT1-4/-1

A low carbon martensitic stainless steel that can be used for joining Type CA-6NM stainless steel castings as well as for joining Types 409, 410, 410S and 405 stainless steels. Provides better crack resistance than a 410 weld metal. Preheat of 300 degrees F is generally sufficient for crack free welds.

Welding Wire  AWS A5.22: E410NiMoT1-4/-1

APPLICATIONS

Single and multiple pass, DCEP, All Position

INDUSTRIES

TYPICAL WELD METAL CHEMISTRY* (Chem Pad)

Welding Positions:

CONFORMANCES AND APPROVALS:

• AWS A5.22, E410NiMoT1-4/-1 H4
• ASME SFA 5.22, E410NiMoT1-4/-1 H4 (F-6, A-8)
• Certified to CWB to AWS A5.22-12, E410NiMoT1 H4 (1/16” only)

Power Generation, Hydro Electric Plants, fabrication of Type CA-6NM castings and joining of 409, 410, 410S, and 405 stainless steels.

STORAGE

TYPE OF CURRENT

SHIELDING GAS

RE-DRYING

STANDARD DIAMETERS

Not recommended

100% Carbon Dioxide (CO2), 75-80% Argon (Ar)/Balance Carbon Dioxide (CO2), 35-50 cfh (17-24 l/min)

Product should be stored in a dry, enclosed environment, and in its original intact packaging

1/16” (1.6 mm), 3/32” (2.4 mm)

Direct Current Electrode Positive (DCEP)

TYPICAL MECHANICAL PROPERTIES* (As Welded)

• Maintaining a proper welding procedure - including pre-heat and interpass temperatures - may be critical
depending on the type and thickness of steel being welded.
• All positions include: Flat, Horizontal, Vertical Up, and Overhead

COMMONLY ORDERED PART NUMBERS

FEATURES AND BENEFITS

●All-position (1/16")
●Self-detaching slag
●Spray-like transfer
●High moisture resistance

●Welds well in vertical (up) position, as well as flat & horizontal
●Excellent welder appeal
●Low spatter and less clean-up
●Good weld soundness and extended shelf-life

Category

Stainless Flux-Cored, Gas-Shielded Wires, All Position