Ni-alloyed wire electrode for submerged arc welding in the multi-run technique of fine grain steels in vessel and apparatus construction as well as pipe steels for low temperature toughness requirements down to -60 °C.

AWS A5.23: ENi1 Submerged arc welding wire 

Chemical Composition (%)

Welding Positions:

Diameter

Copper-coated, smooth finish free from surface defects and foreign matter.

Base Materials

2.0 – 5.0 mm; Sizes and tolerances acc. to ISO 544 and AWS A5.23.

Classification:
EN ISO 14171-A (EN 756): S2Ni1
SFA 5.23 / AWS A5.23: ENi1

Wire Electrode Surface

Package Forms

Fine grain steels acc. to EN 10025, EN 10028 and ASTM: P355ML2 / S355ML and P420ML2 / S420QL1 and ASTM A633 Gr. E
suitable fluxes EN 760: SA AB 1 67 AC H5, EN 760: SA FB 1 67 AC H5 and EN 760: SA FB 1 55 AC

Pipe steels acc. to ISO 3183, EN 10208 and API-5: L360M / X52 to L415M / X60
suitable fluxes EN 760: SA AB 1 67 AC H5, EN 760: SA FB 1 67 AC H5and EN 760: SA FB 1 55 AC

Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.

Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.