This product can be used for the repair of manganese-moly castings, or components that must undergo post weld heat treatment and maintain a tensile strength in the neighborhood of 100,000 psi. The basic slag system ensures a low hydrogen weld deposit.

Description

Welding Positions

Flux Cored Welding Wire

Classification:

AWS A5.29: E100T5-D2C

Slow-freezing, basic-type, flux-cored wire

100% Carbon Dioxide (CO2), 35-50 cfh (17-24 l/min)

Direct Current Electrode Positive (DCEP)

1/16” (1.6 mm), 3/32” (2.4 mm)

Not recommended

Product should be stored in a dry, enclosed environment, and in its original intact packaging

• Single or multi-pass welding

• Manganese-Moly castings

• Heavy equipment
• 100-110 KSI (690-760 MPa)steels requiring stress-relief• Machine components

APPLICATIONS

SLAG SYSTEM OR WIRE TYPE

SHIELDING GAS

TYPE OF CURRENT

STANDARD DIAMETERS

RE-DRYING

TYPICAL WELD METAL CHEMISTRY* (Chem Pad)

TYPICAL MECHANICAL PROPERTIES*

CONFORMANCES AND APPROVALS

• AWS A5.29, E100T5-D2C
• AWS A5.29M, E690T5-D2C
• ASME SFA 5.29, E100T5-D2C

STANDARD DIAMETERS AND PACKAGES: 

For a complete list of diameters and packaging, please contact

• Maintaining a proper welding procedure - including pre-heat and interpass temperatures - may be critical depending on the type and thickness of steel being welded.

• See Above: This information was determined by welding using 100% Carbon Dioxide (CO2) shielding gas with a flow rate between 35-50 cfh (17-24 l/min).

STORAGE

FEATURES AND BENEFITS

• Basic slag system affords excellent impact toughness and low diffusible hydrogen  
• Available in large wire diameters, optimized for welding in the flat and horizontal positions 
• Penetrating arc characteristics, optimized for with 100% CO2 shielding gas 

• Helps minimize the risk of cracking in critical applications and repairs. Improved toughness compared to rutile-slag wires.
• Maintains good mechanical properties after extended post-weld stress-relief (PWHT)

• Suitable for use in applications where the weldment requires lengthy stress-relief hold times

• Allows the use of high welding currents suitable for joiningthick sections and achieving high productivity

• Assists achieving good weld fusion when welding thick sections or narrow joint designs

TYPICAL CHARPY V-NOTCH IMPACT VALUES*

INDUSTRIES

Manganese-moly castings, weldments required to maintain high tensile strength after heat treatment.