Primarily used in the welding of T-1, A514, A517, HY-100, and similar quenched and tempered high strength and low alloy steels. The basic slag system produces a low hydrogen weld deposit reducing the chance of cracking.

Description

Welding Positions

Flux Cored Welding Wire

Classification:

AWS A5.29: E110T5-K4C H4

Slow-freezing, basic-type, flux-cored wire

100% Carbon Dioxide (CO2) 35-50 cfh (17-24 l/min)

Direct Current Electrode Positive (DCEP)

0.045” (1.2 mm), 1/16” (1.6 mm), 3/32” (2.4 mm)

Not recommended

Product should be stored in a dry, enclosed environment, and in its original intact packaging

• Mining equipment

• Earthmoving equipment

• Off-the-road vehicles

APPLICATIONS

SLAG SYSTEM OR WIRE TYPE

SHIELDING GAS

TYPE OF CURRENT

STANDARD DIAMETERS

RE-DRYING

TYPICAL WELD METAL CHEMISTRY* (Chem Pad)

TYPICAL MECHANICAL PROPERTIES*

CONFORMANCES AND APPROVALS

• AWS A5.29, E110T5-K4C H4
• ASME SFA 5.29, E110T5-K4C H4
• ABS, 100% CO2, E110T5-K4C H4
• CWB, 100% CO2, E760T5-K4C H4 (E110T5-K4C H4)

STANDARD DIAMETERS AND PACKAGES: 

For a complete list of diameters and packaging, please contact

• Maintaining a proper welding procedure - including pre-heat and interpass temperatures - may be critical
depending on the type and thickness of steel being welded.
• See Above: This information was determined by welding using 100% CO2 shielding gas with a flow rate between
35-50 cfh (17-24 l/min).

STORAGE

FEATURES AND BENEFITS

• Higher deposition rate than 11018M stick electrode 
• Basic slag system
• 2% nickel content 

• Increases productivity 

• Minimizes the possibility of cracking

• Provides increased weld toughness for critical welds at low temperatures

TYPICAL CHARPY V-NOTCH IMPACT VALUES*

INDUSTRIES

Mining Equipment, Earthmoving Equipment, Off Road Vehicles

TYPICAL DIFFUSIBLE HYDROGEN*