AWS A5.9: ER316L is a submerged arc welding wire intended for welding austenitic stainless steels 1.4435 / 316L.
Suitable for service temperature from -120 ° to +400 °C.

Main Application

Chemical Composition (%)

Welding Positions:

Diameter

Smooth finish free from surface defects and foreign matter.

Base Materials

1.6 – 4.0 mm; sizes and tolerances acc. to ISO 544 and AWS A5.9.

Classification:
EN ISO 14343-A: S 19 12 3 L
SFA 5.9 / AWS A5.9: ER316L

Wire Electrode Surface

Package Forms

1.4401/ X5CrNiMo17-12-2, 1.4404/ X2CrNiMo17-12-2, 1.4435/ X2CrNiMo18-14-3, 1.4436/ X3CrNiMo17-13-3, 1.4571/ X6CrNiMoTi17-12-2, 1.4580/ X6CrNiMoNb17-12-2, 1.4583/ X10CrNiMoNb18-12, 1.4409/ GX2CrNiMo 19-11-2
UNS S31653; AISI 316L, 316Ti, 316Cb

Suitable fluxes: EN 760: SA AF 2 DC, WP 380

Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.

Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.