AWS: E81T1-Ni1C-JH4, E81T1-C1A4-Ni1-H4 Flux-cored (FCAW-G) Wire is designed for high strength, low-alloy applications using 100% CO2 shielding gas.

AWS: E81T1-Ni1C-JH4, E81T1-C1A4-Ni1-H4

Bridge fabrication
Weathering steels
Offshore
Structural fabrication
NACE applications

Typical Applications

Welding Positions

All

Shielding Gas

100% CO2

Welding Positions

Features

Capable of producing weld deposits with impact toughness exceeding 88 - 123 J (65 - 91 ft·lbf) at -40°C (-40°F)
Designed for welding with 100% CO2 shielding gas
Premium arc performance and bead appearance
Meets AWS D1.8 seismic lot waiver requirements
foil bag packaging
Notes: AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.

MECHANICAL PROPERTIES

DEPOSIT COMPOSITION

TYPICAL OPERATING PROCEDURES

NOTES

To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.
NOTE 1: FEMA and AWS D1.8 structural steel seismic supplement test data can be found on this product at www.lincolnelectric.com.
NOTE 2: This product contains micro-alloying elements. Additional information available upon request.

CONFORMANCE

CONFORMANCES          SPECIFICATION         CLASSIFICATION

AWS                                AWS A5.29                    E81T1-Ni1C-JH4
AWS                                AWS A5.36                    E81T1-C1A4-Ni1-H4
ABS                                 ABS - Part 2                 4YQ460SA H5
CWB                               CSA W48                       E551T1-C1A4-Ni1-H4 (E551T1-Ni1C-JH4)
DNV-GL                          DNV - 2.9 IV                   Y46MS H5
LR                                   LR - Chapter 11             4Y46S H5