FEATURES&BENEFITS
• Smooth, easy to control arc
• Excellent strike and re-strike
• Penetrating arc
• Low spatter level
• Light slag• Better control of spot nugget
• Reliable starts and restarts, no rework
• Strong, reliable welds
• Less clean-up, good bead appearance
• Faster clean-up
TYPE OF CURRENT
Welding Positions:
AWS E6022 Low Alloy Electrodes Tianjin, China
Designed for welding roof decking to support beams and other similar applications where burn-through spot welds with full penetration are required. Also designed to weld through galvanized or painted roof decking and can be used on plated and dirty decking as well. Excellent for rapid downhill welding when joining light gauge materials.
Burn-through spot welds for roof decking and sheet metal, rapid downhill welding on light gauge materials.
Single pass, DCEN, DCEP, AC
• Roof decking
• Sheet metal
• Light gauge materials
RECONDITIONING
STORAGE
TYPICAL WELD METAL CHEMISTRY* (Chem Pad)
TYPICAL MECHANICAL PROPERTIES* (As Welded)
For a complete list of diameters and packaging, please contact Hobart Brothers at (800) 424-1543, or (937) 332-5188 for International Customer Service.
STANDARD DIAMETERS AND PACKAGES
• Maintaining a proper welding procedure - including pre-heat and interpass temperatures - may be critical depending on the type and thickness of steel being welded.
CONFORMANCES AND APPROVALS
• AWS A5.1, E6022
ARC LENGTH
Short arc or drag technique
FLAT
Using dragging technique, hold electrode angel 10-15° from 90°
VERTICAL-UP
Not recommended
VERTICAL-DOWN
Use dragging technique, hold electrode 10-15° from 90°
OVERHEAD
Not recommended
Electrode negative, work positive (DCEN), or electrode positive, work negative (DCEP) or AC
60° to 100°F, (20° to 40°C) and below 50% relative humidity or holding oven @ 100° to 120°F (38° to 49°C)
250° to 300°F, (121° to 149°C) for one hour @ temperature
