FEATURES&BENEFITS
• Smooth, stable arc
• Iron powder added to coating
• Slag detaches easily
• All position • Easy to use, good control
• Increased deposition rate, faster travel
• Fast clean-up, good bead appearance
• Welds in the flat, horizontal, vertical and overhead positions
TYPE OF CURRENT
Welding Positions:
AWS E7014 (E4914*) Low Alloy Electrodes Tianjin, China
Versatile, all-position electrode that has a rutile base with an iron powder addition that increases welder-appeal with outstanding deposition rate and travel speed.
Frames, Heavy Sheet Metal, Machine Bases.
Single and multiple pass, AC, DCEN, DCEP, All Position
• Frames
• Heavy sheet metal
• Machine bases
RECONDITIONING
STORAGE
TYPICAL WELD METAL CHEMISTRY* (Chem Pad)
TYPICAL MECHANICAL PROPERTIES* (As Welded)
For a complete list of diameters and packaging, please contact Hobart Brothers at (800) 424-1543, or (937) 332-5188 for International Customer Service.
STANDARD DIAMETERS AND PACKAGES
• Maintaining a proper welding procedure - including pre-heat and interpass temperatures - may be critical depending on the type and thickness of steel being welded.
CONFORMANCES AND APPROVALS
• AWS A5.1, E7014
• ASME SFA 5.1, F3, A-1
• ABS, E7014
• CWB, E4914
ARC LENGTH
Short (1/8” or less)
FLAT
Angle electrode 10-15° from 90° with higher heat than E6012 electrodes
VERTICAL-UP
Use slight whipping or weaving technique
VERTICAL-DOWN
Use higher amperage and faster travel, staying ahead of puddle
OVERHEAD
Use slight whipping motion
AC, Direct Current Electrode Positive (DCEP), or Direct Current Electrode Negative (DCEN)
60° to 100°F, (20° to 40°C) and below 50% relative humidity or holding oven @ 100° to 120°F (38° to 49°C)
250° to 300°F, (121° to 149°C) for one hour @ temperature
*For out-of-position welding, reduce amperage shown by 15%.
