Xiang Welding Industrial Co Ltd
This wire has a basic slag system and is designed excellent impact properties at low temperatures. Weld metal hydrogens are very low making this wire more crack resistant


Description
Welding Positions
Flux Cored Welding Wire
Classification:
E70T-5M J H4
EN ISO 17632-A: – T 46 6 B M 3 H5 / T 42 4 B C 3 H5
TYPICAL MECHANICAL PROPERTIES*(As Welded)
 Slow-freezing, basic-type, flux-cored wire



75-82% Argon (Ar)/Balance Carbon Dioxide (CO2), 35-50 cfh (17-24 l/min)



Direct Current Electrode Positive (DCEP)



0.045” (1.2 mm), 1/16” (1.6 mm)


Not recommended



 Product should be stored in a dry, enclosed environment, and in its original intact packaging
Single and multiple pass applications with Argon/CO2 gas shielding
• Single or multi-pass welding
• Non-alloyed and fine grain steel
• Heavy fabrication
• Heavy equipment
• Equipment repairs and modifications
APPLICATIONS
SHIELDING GAS
TYPE OF CURRENT
STANDARD DIAMETERS
RE-DRYING
TYPICAL WELD METAL CHEMISTRY* (Chem Pad)
CONFORMANCES AND APPROVALS:
• AWS A5.20, E70T-5MJ H4
• AWS A5.20M, E490T-5MJ H4
• ASME SFA 5.20, E70T-5MJ H4
• DNV-GL, 82% Ar/18% CO2, IV Y40MS (H5)
• EN 17632-A: T 46 6 B M 3 H5
• Lloyd’s Register, 82% Ar/18% CO2 5Y46S H5
• ABS, 82% Ar/18% CO2, 4YSA, 4Y400SA H5
• Maintaining a proper welding procedure - including pre-heat and interpass temperatures - may be critical
depending on the type and thickness of steel being welded.
• See Above: This information was determined by welding using 75% Argon (Ar)/25% Carbon Dioxide (CO2) shielding
gas with a flow rate between 35-50 cfh (17-24 l/min).
STORAGE
FEATURES AND BENEFITS
• Seamless flux-cored electrode
• Low hydrogen weld deposit 
• Good impact toughness
• Very low moisture reabsorption after extended exposure
• Minimizes risk of hydrogen-induced cracking
• Minimizes risk of cracking in critical applications
Keywords
AWS E70T-5M J H4 Seamless Wire,Flux Cored Welding Wire ,China, Tianjin.
EN ISO 17632-A: – T 46 6 B M 3 H5 / T 42 4 B C 3 H5
STANDARD DIAMETERS AND PACKAGES: 
For a complete list of diameters and packaging, please contact Hobart Brothers at (800) 424-1543 or (937) 332-5188 for International Customer Service.
TYPICAL DIFFUSIBLE HYDROGEN*
TYPICAL CHARPY V-NOTCH IMPACT VALUES* (As Welded)
SLAG SYSTEM