Standard

Submerged arc welding wire Application

SAW welding wire

Submerged arc welding wire

Submerged Arc Welding wire also called SAW wire vary from 1.2mm ('thin' wire or twin wire submerged arc) to 6.4mm in diameter and are capable of carrying welding currents ranging from 150 to 1600amps. The wires for ferritic steels are generally copper coated to increase contact tip life, improve electrical conductivity and extend the shelf life.
The welding wire is generally of a composition that matches that of the parent metal and wires are available for the welding of carbon and low and high alloy steels, stainless steels, nickel and copper/nickel alloys. In addition, submerged arc welding may be used for surfacing with corrosion or wear resistant coatings using both wires and flat strips. The wires may be solid or metal cored. Strips may be rolled or sintered.

Standard: AWS El-8, H08A, AWS EM-12, H08MnA, Eh-14, H10Mn2, EM12K
Sizes: 2.5mm, 3.2mm, 4.0mm, 5.0mm
Packaging Details: OEM acceptable
25KG/coil, 50KG/coil, 250KG/coil.
Our advantages is stable arc, little spatter, less smoke; higher deposition efficiency; excellent welding performance; easy restrike.

Payment terms: 100% LC at sight or 30% TT in advance balance against copy of BL.
Trade terms: FOB, CFR, CIF, Loading Port: Xingang, Tianjin, China
Delivery Detail: Within 15 days after confirmation
Key words: welding wire, Submerged Arc Welding wire, SAW wire, AWS El-8, H08A, AWS EM-12, H08MnA, Eh-14, H10Mn2, EM12K

SFA 5.9: ER385 is a submerged arc welding wire suitable for welding steels of similar composition of 20Cr/25Ni/4.5Mo/1.5Cu type (AISI 904L).

Wire electrode for submerged arc welding intended for welding 13% chromium steels.
Service temperatures up to +450 °C.

Wire electrode for submerged arc welding intended for welding martensitic 13% chromium-nickel steels. Also used for overlay mild and low alloy steels. Used in Turbines, Valve bodies, High pressure piping, Offshore, Power generation.

Wire electrode for submerged arc welding often used for surfacing applications which need superior resistance to abrasion. It requires preheat and inter-pass temperatures of not less than 225ºC, followed by slow cooling. Post weld heat treatment is used to temper the weld deposit.

Wire electrode for submerged arc welding intended for welding ferritic and martensitic chromium steels with 15-17%Cr, AISI 430.Also suitable for surfacing gas, water and steam valves and fittings. Service temperatures up to +450 °C. Scaling resistant up to +950 °C.

SFA 5.14: ERNiCrMo-3 welding wire has been developed for welding INCONEL alloy 625, INCOLOY alloy 825, INCOLOY alloy 25-6MO, alloy 20, welding the clad side of joints in steel with nickel-chromium molybdenum alloys, cladding steel with nickel-chromium molybdenum weld metal, surfacing of mild steel and for dissimilar welding of stainless steels to nickel alloys and carbon steels.

SFA 5.14: ERNiCr-3 welding wire has been developed for welding Ni base alloys. The weld metal has excellent mechanical properties with high hot cracking resistance, high strength and good corrosion resistance, including oxidation resistance and creep-rupture strength at elevated temperatures.

Search Submerged arc welding wire Products

SDX EM13K is a copper-coated carbon-steel solid wire for submerged arc welding. Moderate manganese and silicon contents allow faster travel speeds, resistance to porosity, and improved mechanical properties.In an effort to best serve the packaging needs and requirements of our customers globally, this product features region-exclusive part numbers. To obtain the complete list of part numbers available in your region, e-mail us at subarc@itw-welding.com, contact your regional ITW Welding office, or contact Hobart Brothers customer service (North America) 

SDX S3Ni1Mo-EF3 is a copper-coated, low-alloy, solid wire for submerged arc welding. The nominal nickel-molybdenum composition of SDX S3Ni1Mo-EF3 provides good low-temperature toughness and is suitable for welding many high-strength low-alloy (HSLA) .In an effort to best serve the packaging needs and requirements of our customers globally, this product features region-exclusive part numbers. To obtain the complete list of part numbers available in your region, e-mail us at subarc@itw-welding.com, contact your regional ITW Welding office, or contact Hobart Brothers customer service (North America)

AWS A5.17: EM12K, Submerged Arc Solid Wire Carbon Steel ,China, Tianjin is a copper-coated carbon-steel solid wire for submerged arc welding. SDX S2Si-EM12K is a versatile, general purpose product suitable for joining a wide range of non-alloyed steels with a wide variety of flux(es).

6