Standard
TIG welding wire Application
TIG welding wire
Argon arc welding wire
TIG welding wire(Argon Arc welding wire) (AWS ER70S-6) has strong resistance to surface scales and oil stains on the base metal. It has low blowhole sensitivity.
It is used to welding carbon steels and 500Mpa high strength steels, used in car, building, ships and bridge. Can also be used for speed welding of sheet and pipes.
Our advantages is stable arc, little spatter, less smoke; higher deposition efficiency; excellent welding performance; easy restrike.
Argon Arc welding wire(TIG wire)
Standard: AWS A5.18 ER70S-6, GB ER50-6, G3Si1 (SG2), DIN SG2, BS A18, JIS YGM12
Diameter: 1.2mm, 1.6mm, 2.0mm, 2.5mm
Length: 0.5m, 1m
Packaging Details: OEM acceptable
5KG/box, 10KG/box
Payment terms: 100% LC at sight or 30% TT in advance balance against copy of BL.Trade terms: FOB, CFR, CIF, Loading Port: Xingang, Tianjin, ChinaDelivery Detail: Within 15 days after confirmation
Key words: Argon Arc welding wire, TIG wire, GTAW, TIG,ER70S-6, GB ER50-6, G3Si1, SG2, ER70S-6, DIN SG2, BS A18, JIS YGM12, TIG welding wire
TIG welding wire Loading
Search Products
TIG welding wire
AWS: ER317, ER317L TIG welding wire Lower carbon & higher molybdenum content increases resistance to corrosion
AWS: ER320LR TIG welding wire Similar to ER320 with Lower Residuals (LR) of carbon, silicon,phosphorus, and sulfur to reduce hot cracking & micro-fissuring
AWS: ER347 TIG welding wire Welding of types 347 and 321 stainless and stainless clad steels
AWS: ER385 TIG welding wire Super austenitic stainless steel provides resistance to stress corrosion cracking
AWS: ER409Nb TIG welding wire Ferritic stainless with additional niobium improves corrosion resistance and promotes a ferritic micro-structure
8
AWS: R5183 TIG welding wire Aluminum Magnesium Manganese alloy commonly used for higher strength welding of 5XXX and 6XXX base materials. It’s has higher columnar strength and uses less amperage for the same WFS as 4XXX filler metals.
Alloy 2319 used widely in high strength structural and aircraft applications. this alloy provides better strength and ductility than 4XXX filler metals on Aluminum Copper alloys
Bare corrosion resisting chromium-nickel welding rod for welding of heat resistant austenitic steels of the 25Cr-20Ni-type. The wire has a high Cr content and givesgood oxidation resistance at high temperatures. Common applications are industrial furnaces and boiler parts as well as heat exchangers
Material contains 9% chromium and 1% molybdenum. Classification is intended for welding base materials of similar composition.Requires controlled preheat, inter-pass and post-weld heat treatment.
AWS 5.28 ER80S-B2 is used in high temperature applications. 300ºF min. preheat and inter-pass are recommended during the welding operation.
