Standard
Flux Cored Welding Wire Application
Flux Cored Wire
Flux Cored Arc Welding Wire
FCAW welding wire production video
FabCO 73 has a very high amount of de-oxidizing elements to handle moderately mill scale, rust and other foreign contaminants
Designed as a low Manganese (Mn) E71T-1C product to assist with conformance to OSHA requirements and NIOSH and ACGIH recommendations for Manganese. This product offers reductions of Mn in the weld fume of 60-80% over a standard E71T-1C product with low diffusible hydrogen as well as enhanced operator appeal and excellent out of positional capability.
All position wire for both CO2 and mixed gas. For mild and low alloy steel applications.
The stiff arc action of this wire enhances the deep penetration for out of position welding. Designed for use welding carbon steels, or higher strength steels where the properties of an E71T-1 are deemed adequate.
Formulated to allow excellent impact values at lower temperatures. All position wire with low hydrogen levels.
All position wire for both CO2 and mixed gas. For mild and low alloy steel applications.
Formulated to allow excellent mechanical toughness properties at lower temperatures in both the as welded and post weld heat treat conditions. All position wire with low hydrogen levels.
AWS A5.20: E71T-1MJ H8, E71T-9MJ H8, E71T-12MJ H8,EN ISO 17632-A T42 4 P M21 2 H10 are Flux Cored Welding Wire ,.Formulated to allow excellent mechanical toughness properties at lower temperatures in both the as welded and post weld heat treat conditions. All position wire with low hydrogen levels.
AWS A5.29: E100T5-D2C Flux Cored Welding Wire can be used for the repair of manganese-moly castings, or components that must undergo post weld heat treatment and maintain a tensile strength in the neighborhood of 100,000 psi. The basic slag system ensures a low hydrogen weld deposit.
Intended for single and multiple pass applications in all positions. Designed for carbon and higher strength steels.
Search Products
6
